Home › Blog › How to Fix a Leaking Outdoor Spigot
Spigot repair

How to Fix a Leaking Outdoor Spigot: Easy Repair Guide

A dripping outdoor spigot wastes water and can freeze and burst in an Illinois winter. This guide explains how to fix a leaking outdoor spigot, which parts fail and when a plumber should replace the faucet.

Plumber repairing copper supply lines at a Wilmette, Illinois home(847) 908-9881Call to confirm availability
Find the leak

Where Spigots Leak

Spigot leaks appear in a few predictable places. Identifying where the water appears tells you which part needs attention and whether a simple repair will do.

Leak locationLikely causeFix
From the spoutWorn washer or seatReplace washer or seat
Around the handleWorn packing or loose nutTighten or replace packing
At the pipe connectionLoose fitting or damaged threadsReseal or replace the fitting
Inside the wallCracked pipe from freezingCall a plumber
Hose connectionWorn hose washerReplace the hose washer
Warning

Water inside the wall or a basement ceiling near the spigot may mean a frozen pipe has cracked. Shut off the water and call a plumber.

Tools

Tools and Parts

Adjustable wrench

Loosens the packing nut.

Screwdriver

Removes the handle screw.

Replacement washers

Match size and shape.

Packing string or O rings

Seals around the stem.

Plumber tape

Seals threaded parts.

Penetrating oil

Frees stuck parts.

Shut off

Preparing the Repair

Shut off the water to the spigot at the interior valve if there is one, or at the main. Open the spigot to drain the pressure, and have a bucket and towels handy for leftover water.

  1. Close the interior shutoff valve.
  2. Open the spigot to relieve pressure.
  3. Remove the handle screw and handle.
  4. Loosen the packing nut with a wrench.
  5. Pull out the stem carefully.
Washers

Replacing the Washer

A drip from the spout almost always means a worn washer at the end of the stem. Unscrew the old washer, clean the seat and install a new washer of the same size. Replace the screw if it is corroded.

Removehandle and stemReplacewasherCheckthe seatReassembleand test
Washer repair flow
Packing

Fixing Handle Leaks

If water seeps around the handle, tighten the packing nut a little first. If that does not stop it, replace the packing washer or wrap new packing string around the stem under the nut. Take care not to overtighten, which makes the handle stiff.

  • Tighten the packing nut a quarter turn
  • Replace the packing washer or O ring
  • Add packing string if needed
  • Test with water on and check again
Winter

Protecting Spigots From Freezing

Illinois winters can freeze outdoor spigots in a single cold night. Disconnect hoses before the first freeze, drain the line and cover the faucet with an insulated cap. A frost free sillcock reaches deeper into the wall and protects the valve from freezing.

StepWhen
Disconnect and store hosesBefore first freeze
Shut off interior valve and drainFall
Install an insulated coverFall
Consider a frost free sillcockNext upgrade
Replace

When to Replace the Spigot

If the faucet body is cracked, corroded or leaking from the base, repair is not worth it. Replacing the spigot is a short job for a plumber. For help, see our faucet repair service. Learn the local rules in our Illinois plumbing laws guide.

  • Corroded or cracked faucet body
  • Repeated leaks after repairs
  • Water inside the wall
  • Hard to turn or stuck handle
  • No shutoff valve inside the house
Types

Know Your Spigot Type

Outdoor faucets come as compression, ball or quarter turn and frost free models. Compression faucets use rubber washers that wear out, while quarter turn designs use a ceramic cartridge that rarely drips. A frost free sillcock has a long stem that puts the shutoff inside the heated part of the house, which protects it from freezing, but the vacuum breaker on top can also leak when it fails.

TypeCommon problemTypical fix
CompressionWorn washerReplace washer and seat
Quarter turnWorn cartridgeReplace cartridge
Frost freeFailed stem washer or vacuum breakerReplace stem or breaker
Hose bib with ball valveLoose packingTighten or replace packing
Water waste

The Real Cost of a Small Drip

A small drip may not seem like much, but it adds up over a season. A faucet that drips once per second can waste thousands of gallons in a year, and constant moisture near the foundation can cause mold, stains and soil erosion. Fixing a leak early costs little and protects your water bill and your home.

  • Wasted water raises your utility bill
  • Constant moisture damages siding and foundation
  • Standing water near the wall attracts insects
  • Winter freezes can split the pipe
  • Small drips often get worse over time
Testing

Testing Your Repair and Checking Hoses

After reassembling the spigot, turn the water on slowly and check the handle, the spout and the connection to the wall. Attach a hose and make sure the hose washer is also in good condition, since many leaks come from a worn hose end. Watch the spigot for a day to confirm it stays dry.

CheckPass if
Spout with water onNo drip when shut off
Handle areaDry around the stem
Wall connectionNo dampness inside or outside
Hose endNo spray at the coupling
Note

If you ever see water inside the house near the spigot, shut off the supply right away and call a plumber.

Outdoor Spigot Questions

How to fix a leaking outdoor spigot at the handle?

Tighten the packing nut or replace the packing washer.

Why does my spigot drip when off?

The washer or seat is worn.

Can I repair it without shutting off water?

No, shut off the supply first.

How do I stop spigots freezing?

Disconnect hoses, drain the line and insulate the faucet.

When should I call a plumber?

If water appears inside the wall or the faucet is corroded.

Need Help With a Plumbing Problem in Wilmette?

Call us and describe what is happening. We will explain the options and when we can visit.

Call (847) 908-9881
Call (847) 908-9881